This is the current officially released version of Clinical Quality Language, 1.4 in it's permanent home.
For a full list of available versions, see the Directory of published versions 
.
| Clinical Decision Support Work Group | Maturity Level: 4 | Standards Status: Trial Use |
This section contains more detailed information relating to the intended semantics of the Clinical Quality Language. These topics are specifically relevant for readers interested in building translation, semantic validation, or evaluation applications for CQL.
Note that the semantics are described here with reference to the representation defined by the ELM, but because CQL syntax is equivalent to ELM, the semantics apply to CQL as well.
This section discusses the problem of clinical data retrieval in the clinical quality space in general, and how the problem is addressed in the CQL specification.
The problem of determining what data is required in the evaluation of an artifact containing arbitrary queries against the data model is equivalent to the problem of query containment from database theory. This problem is known to be undecidable for arbitrary queries of the relational algebra, but is also shown to be both decidable and equivalent to the problem of query evaluation for the restricted class of conjunctive queries (Foundations of Databases, Abiteboul, Hull, Vianu).
In the health quality domains of measurement and improvement, this problem is further complicated by the problem of terminology mapping. The meaning of a particular clinical statement is represented with a vocabulary consisting of codes which determine the type of statement being represented. For example, a diagnosis clinical statement may be classified using the ICD-10 vocabulary, identifying the specific diagnosis represented.
In order for health quality artifacts to operate correctly, the meaning of each clinical statement, as identified by the vocabularies involved, must be preserved. However, this meaning is often represented in different vocabularies in different systems. A mapping between the vocabularies is therefore required in order to facilitate expression and evaluation of the artifact.
In addition, clinical data is represented in differing schemas across various clinical data sources, and must therefore be mapped structurally into the clinical data model used by an artifact.
These problems collectively constitute what is referred to as the “curly braces problem” in the Arden space. This problem arises because of the difficulty in defining the structural and semantic aspects of the data involved.
The solution to this problem proposed by the CQL specification is to create a well-defined and relatively simple interface between the clinical data provided by data sources, and the usage of that data within the artifact.
First, all clinical data within a CQL artifact is represented using a common, standard data model. This allows content to be authored without regard to the specific data models used by various clinical data sources.
Second, all references to clinical data within a quality artifact are represented using a specific type of expression that only allows a well-defined set of clinically relevant criteria to be used to reference the data. The purpose of this restriction is two-fold: First, it allows the data required for evaluation to be determined solely by inspection of the artifact. And second, it allows for easy and reliable implementation of the interface between the evaluation engine and the clinical data source, because the criteria used to request information from the clinical data source are simple and well-defined.
Third, by using standard terminologies within this data interface, the CQL specification can guarantee that any given clinical statement referenced in an artifact has the same meaning as the data that is provided to the artifact from the clinical data source. At a high level, this is the terminology problem; ensuring that the vocabularies used within the artifact are accurately mapped to the vocabularies used by the clinical data source.
These three motivating factors inform the design of the retrieve expression (Retrieve element in ELM) used within the CQL specification.
Even though CQL and ELM are intended to be used with a standard data model, there are many possibilities for variance in the way that data is provided, even within a particular model. This problem leads to the potential for artifacts to reference properties within the model that may or not be provided within a given specific instance of clinical data. To address this potential problem, the retrieve elements within ELM specify not only the type of the data (meaning the specific model type being retrieved), but optionally a template, or profile identifier that further constrains the data that is expected in a given retrieve. If a template identifier is provided, then the retrieve expression is expected to return only data that matches the constraints in the given template.
For example, consider the following retrieve element:
<operand xsi:type="Retrieve"
dataType="quick:Condition"
templateId="qicore-condition"
codeProperty="code">
<codes xsi:type="ValueSetRef" name="Other Female Reproductive Conditions"/>
</operand>In this example, the data type is specified as "quick:Condition", indicating that the result of the retrieve is a list of Condition instances. In addition, each instance must conform to the profile defined by the identifier "qicore-condition".
To help communicate validity of an artifact for a specific use, this specification defines two conformance levels related to this use of templates:
A quality artifact can be said to be strictly conforming if all references to clinical statement model properties (elements and attributes of model types) within the artifact are explicitly constrained by the templates used in the retrieves.
A quality artifact can be said to be loosely conforming if the artifact references properties that are not explicitly constrained by the templates used in the retrieves. This is not to say that the artifact is necessarily invalid, just that the instances of clinical data provided to the retrieve may or may not contain the elements referenced by properties within the artifact.
Because of the way data access is modeled within CQL, the data requirements of a particular artifact can be clearly and accurately defined by inspecting only the Retrieve expressions defined within the artifact. The following table broadly describes the data defined by each retrieve:
| Item | Description |
|---|---|
Clinical Data Type |
The type of clinical data to be retrieved. This includes both the data type and the template identifier. |
Codes |
The set of codes defining the clinical data. Only clinical data with matching codes (based on the code path of the retrieve) in the set will be retrieved. If no codes are specified, clinical data with any code will be retrieved. |
Date Range |
The date range for clinical data. Only data within the specified date range (based on the date range path of the retrieve) will be retrieved. |
Table 5‑A
These criteria are designed to allow the implementation environment to communicate the data requirements for an artifact, or group of artifacts, to a consumer to allow the consumer to gather all and only the relevant clinical information for transport to the evaluation environment. This supports the near-real-time clinical decision support scenario where the evaluation environment is potentially separate from the medical records system environment.
To support further reducing the overall size of data required to be transported, the following steps can be taken to combine retrieve descriptors that deal with the same type of clinical data.
First, create a retrieve context for each unique type of retrieve using the retrieve data type (and template identifier) for each retrieve. Note that if the determination here involves dynamic information, the retrieve is not considered “initial” and could result in additional data being requested by the engine in order to complete the evaluation. An implementation environment may opt to restrict artifacts to only those that contain statically determined data requirements.
Next, for each retrieve, add the codes to the matching retrieve context (by data type), recording the associated date range, if any, for each code. Note that the empty set of codes should be represented as the single code “ALL” for the purposes of this method. As date ranges are recorded, they must be merged so that for each code in each retrieve context, no two date range intervals overlap or meet.
Once the date ranges for each code within each unique retrieve context are determined, the unique set of date ranges for all codes is calculated, accumulating the set of associated codes. Each unique date range for the context then results in a final descriptor. As part of this process, the “ALL” placeholder code is replaced with the empty set of codes.
This process produces a set of clinical data descriptors with the following structure:
| Property | Description |
|---|---|
Clinical Data Type |
The type of clinical data required (including template identifier) |
Codes |
The set of applicable codes, possibly empty (meaning all codes) |
Date Range |
The applicable date range, possibly empty (meaning all dates) |
Table 5‑B
Collectively, these descriptors then represent the minimum initial data requirements for the artifact, with any overlapping requests for the same type of data collapsed into a single request descriptor.
Note that for the purposes of this method, the notion of the Clinical Data Type must be inclusive of the attributes used for filtering the codes and date ranges. For example, a retrieve of Condition data filtered by code must be considered separately from a retrieve of Condition data filtered by severity.
In addition to being used to describe the initial data requirements, this same process can be used to collapse additional data retrieves that are encountered as part of further evaluation of the artifact.
In order to completely specify the semantics of the expression logic defined by CQL, the intended execution model for expressions must be clearly defined. The following sections discuss the conceptual components of the expression language, and how these components are defined to operate.
The data model for CQL provides the overall structure and definition for the types of operations and capabilities that can be represented within the language. Note that the schema itself is layered into a core expression schema, and a more specific, clinical expression schema. The expression schema deals with defining the core operations that are available without respect to any specific model. The clinical expression schema then extends those operations to include references to clinical data.
Note that although the expression language deals with various categories of types, these are only conceptually defined within the expression language schema. There is no expectation within the core expression language that any particular data model be used, only that whatever concrete data model is actually used can be concretely mapped to the type categories defined within CQL. Because these type categories are extremely broad, this allows the CQL expression language component to be used with a large class of concrete data models without modifying the underlying specification.
A value within CQL represents some piece of data. All values are of some type, which designates what operations can be performed on the value. There are four categories of types within CQL:
Simple types – Types representing simple values such as strings, integers, dates, and decimals
Structured types – Types representing composite values consisting of sets of named properties, each of which has a declared type, that may or may not have a current value of that type.
Collection types – Types representing lists of values of some declared type
Interval types – Types representing an interval of some declared type, called the point type
Choice types - Types representing values from a set of possible types
Simple types allow for the representation of simple, atomic types, such as integers and strings. For example, the value 5 is a value of type Integer, meaning that it can be used in operations that require integer-valued input such as addition or comparison.
Note that because CQL defines a set of basic supported types, an implementation must map these types to the equivalent types in the selected data model. Ideally, this mapping would occur as part of the data access layer to isolate the mapping and minimize complexity.
Structured types allow for the representation of composite values. Typically, these types correspond to the model types defined in the clinical data model used for the artifact. Structured types are defined as containing a set of named properties, each of which are of some type, and may have a value of that type.
As with simple types, the core expression layer does not define any structured types, it only provides facilities for constructing values of structured types and for operating on structured values.
Collection types allow for the representation of lists and sets of values of any type. All the values within a collection are expected to be of the same type.
Collections may be empty, and are defined to be 0-based for indexing purposes.
Interval types allow for the representation of ranges over some point type. For example, an interval of integers allows the expression of the interval 1 to 5. Intervals can be open or closed at the beginning and/or end of the interval, and the beginning or end of the interval can be unspecified.
The core expression layer does not define any interval types, it only provides facilities for constructing values of interval types, and for operating on intervals.
Choice types allow for the representation of elements that may be any of a possible list of types. A given value at run-time will always be of a specific type, so a choice type is only a compile-time construct that allows for data models that contain elements with multiple possible types, or for the results of expressions where the result may be any of a possible set of types (e.g. a union of different types).
The expression language represented by the ELM is defined as an Abstract Syntax Tree. Whereas a traditional language would have syntax and require lexical analysis and parsing, using the ELM exclusively allows expressions to be represented directly as trees. This removes potential ambiguities such as operator order precedence, and makes analysis and processing of the expressions in the language much easier.
Concretely, this is accomplished by defining the language elements as classes in a UML model. Each language element is represented by a type in the UML model. For example, the Literal class represents the appearance of a literal expression, and has attributes for specifying the type of the literal, as well as its actual value.
Arguments to operations are represented naturally using the hierarchical structure of the model. For example, the Add operator is represented as a BinaryExpression descendant, indicating that the operation takes two arguments, each of which is itself an expression.
This general structure allows expressions of arbitrary complexity to be built up using the language elements defined in the schema. Essentially, the language consists of only two kinds of elements: 1) Expressions, and 2) Expression Definitions (including Functions).
Each expression returns a value of some type, and an expression or function definition allows a given expression to be defined with an identifier so that it can be referenced in other expressions.
These expressions and expression definitions are then used throughout the CQL specification wherever logic needs to be defined within an artifact.
Semantic Validation of an expression within CQL is the process of verifying that the meaning of the expression is valid. This involves determining the type of each expression, and verifying that the arguments to each operation have the correct type.
This process proceeds as follows:
The graph of the expression being validated is traversed to determine the result type of each node. If the node has children (operands) the type of each child is determined in order to determine the type of the node. The following table defines the categories of nodes and the process for determining the type of each category:
| Node Category | Type Determination |
|---|---|
Literal |
The type of the node is the type of the literal being represented. |
Property |
The type of the node is the declared type of the property being referenced. |
ParameterRef |
The type of the node is the parameterType of the parameter being referenced. |
ExpressionRef |
The type of the node is the type of the expression being referenced. |
Retrieve |
The type of the node is a list of the type of the data being requested. |
FunctionRef/ |
Generally, the type of the node is determined by resolving the type of each operand, and then using that signature to determine the resulting type of the operator. |
ValueSetRef |
The type of the node is a list of codes. |
Query |
If the query has a return clause, the result is a list of the type of the return expression. Otherwise, the result type is determined by the source of the query. |
AliasRef |
The type of the node is the element type of the type of the query source referenced by the alias. |
QueryLetRef |
The type of the node is the type of the referenced expression defined within the query scope. |
Table 5‑C
During validation, the implementation must maintain a stack of symbols that track the types of the objects currently in scope. This allows the type of scope-sensitive operators such as Current and Property to be determined. Refer to the Execution Model (5.2.4) section for a description of the evaluation-time stack.
Details for the specifics of type determination for each operator are provided with the documentation for those operators.
All logic in CQL is represented as expressions. The language is pure functional, meaning no operations are allowed to have side effects of any kind. An expression may consist of any number of other expressions and operations, so long as they are all combined according to the semantic rules for each operation as described in the Semantic Validation (5.2.3) section.
Because the language is pure functional, every expression and operator is defined to return the same value on every evaluation within the same artifact evaluation. In particular this means:
All clinical data returned by request expressions within the artifact must return the same set on every evaluation. An implementation would likely use a snapshot of the required clinical data in order to achieve this behavior.
Invocations of non-deterministic operations such as Now() and Today() are defined to return the timestamp associated with the evaluation request, rather than the clock of the engine performing the evaluation.
Once an expression has been semantically validated, its return type is known. This means that the expression is guaranteed to return either a value of that type, or a null, indicating the evaluation did not result in a value.
In general, operations are defined to result in null if any of their arguments are null. For example, the result of evaluating 2 + null is null. In this way, missing information results in an unknown result. There are exceptions to this rule, notably the logical operators, and the null-handling operators. The behavior for these operators (and others that do not follow this rule) are described in detail in the documentation for each operator.
Evaluation takes place within an execution model that provides access to the data and parameters provided to the evaluation. Data is provided to the evaluation as a set of lists of structured values representing the clinical information. In order to be represented in this data set, a given structured value must be a cacheable item. A cacheable item must have the following:
| Property | Description |
|---|---|
Identifier |
A property or set of properties that uniquely identify the item |
Codes |
A code or list of codes that identify the associated clinical codes for the item |
Date |
A date time defining the clinically relevant date and/or time of the item |
Note that the "must have" here is referring to the fact that structures to be tracked in this way must have these elements, not that the instances of those structures must have values for them.
Table 5‑D
Note that the context associated with each ExpressionDef is important here, as it provides a filter on the set of data returned as described by the model. For example, in the Patient context, only data for a specific patient should be returned, and the unique id of that patient must be provided by the evaluation environment. This means in particular that the relationship of data elements in the model to the context must be understood and managed by the implementation so that only data related to the current context is provided through the data access layer.
Evaluation consists of two phases, a pre-processing phase, and an evaluation phase. The pre-processing phase is used to determine the initial data requirements for a rule. During this phase any retrieve expressions in the rule are analyzed to determine what data must be provided to the evaluation in order to successfully complete a rule evaluation. This set of data descriptors is produced using the method described in the Artifact Data Requirements (5.1.3) section. This means in particular that only retrieves whose Codes and DateRange expressions are compile-time evaluable should be considered to determine initial data requirements. This means that these expressions may not reference any clinical information, though they are allowed to reference parameter values.
During the evaluation phase, the result of the expression is determined. Conceptually, evaluation proceeds as follows:
The graph of the expression being evaluated is traversed and the result of each node is calculated. If the node has children (operands), the result of each child is evaluated before the result of the node can be determined. The following table describes the general categories of nodes and the process of evaluation for each:
| Node Category | Evaluation |
|---|---|
Literal |
The result of the node is the value of the literal represented. |
FunctionRef/Operation |
The result of the node is the result of the operation described by the node given the results of the operand nodes of the expression. |
Retrieve |
The result of the node is the result of retrieving the data represented by the retrieve—i.e., a list of structured values of the type defined in the retrieve representing the clinical information being retrieved. |
ExpressionRef |
The result of the node is the result of evaluating the referenced expression. |
ParameterRef |
The result of the node is the value of the referenced parameter. |
ValueSetRef |
The result of the node is the expansion set of the referenced value set definition. Note that in the case of the InValueSet operator specifically, the expansion set need not be materialized; the membership test can be passed to a terminology service using only the valueset definition information. |
Table 5‑E
During evaluation, the implementation must maintain a stack that is used to represent the value that is currently in scope. Certain operations within the expression language are defined with a scope, and these operations use the stack to represent this scope. The following table details these operations:
| Operation | Stack Effect |
|---|---|
Query |
Query evaluation is discussed in detail below. |
Filter |
For each item in the source operand, the item is pushed on to the stack, the condition expression is evaluated, and the item is popped off of the stack. |
ForEach |
For each item in the source operand, the item is pushed on to the stack, the element expression is evaluated, and the item is popped off of the stack. |
Table 5‑F
The scope attribute of these operators provides an optional name for the item being pushed on to the stack. This name can be used within the Current and Property expressions to determine which element on the stack is being accessed. If no scope is provided, the top of the stack is assumed.
Details for the evaluation behavior of each specific operator are provided as part of the documentation for each operator.
In general, query evaluation can be performed in many different ways, especially when queries involve large numbers of sources. Rather than address the many ways queries could be evaluated, the intent of this section is to describe the expected semantics for query evaluation, regardless of how the underlying implementation actually executes any given query.
The outline of the process is:
Evaluate the sources
For each item in the source
evaluate any let clauses within the query
evaluate each with or without clause in the query
evaluate the where clause, if present
evaluate the return clause
Sort the results if a sort clause is present
The following sections discuss each of these steps in more detail.
The first step in evaluation of a given query is to establish the query sources. Conceptually, this step involves generating the cartesian product of all the sources involved. In a single-source query, this is simply the source. But for a multi-source query, the evaluation needs to be performed for every possible combination of the sources involved.
How this actually occurs is up to the specific implementation, but note that the evaluation must still be able to reference components originating from each individual source using the alias for the source defined in the query. A simple solution to allowing this is to define the query source internally as a list of tuples, each with an element for each source whose value is the tuple from that source. This list is then simply populated with the cartesian product of all sources, and alias access within the rest of the query can be implemented as tuple-element access.
Note that although this discussion generally treats sources as lists, query sources in general may be singleton values as well.
Once the source for the query has been established, the iterative clauses must be evaluated for each element of the source, in order, as described in the following sections.
The let clause, if present, allows a CQL author to introduce expression definitions scoped to the query scope. For each definition specified in the let clause, the result of the expression is evaluated and made available within the query scope such that subsequent clauses can access the value. Note that an implementation may opt for lazy evaluation, saving the cost of evaluating an expression that is never actually referenced.
Each with clause present in the query acts as a filter to remove items from the result if they do not satisfy the conditions of the with clause. Evaluation proceeds by introducing the related source into the query scope and evaluating the “such that” condition of the with clause for each element of the introduced source. If no element of the introduced source satisfies the such that condition, the current row of the query source is filtered out of the result.
Note that because this is a positive existence condition, the test can stop after the first positive result. Only in the case of a negative result would all the elements of the introduced source need to be processed.
Each without clause present in the query acts as a filter to remove items from the result if they satisfy the conditions of the without clause. This is the opposite of the with clause. Evaluation proceeds the same way as a with clause, except that an element from the query source will only pass the filter if there a no rows from the introduced source that satisfy the conditions of the without clause.
The where clause, if present simply determines whether each element should be included in the result. If the condition evaluates to true, the element is included. Otherwise, the element is excluded from the result.
The return clause, if present, defines the final shape of each element produced by the query, as well as whether or not to eliminate duplicates from the result. If distinct is specified as part of the return clause, any duplicates must not appear in the result set. The expression defined in the return clause is evaluated and the result is added to the output. If neither all or distinct is specified, distinct is the default behavior.
After the iterative clauses are executed for each element of the query source, the sort clause, if present, specifies a sort order for the final output. This step simply involves sorting the output of the iterative steps by the conditions defined in the sort clause. This may involve sorting by a particular element of the result tuples, or it may simply involve sorting the resulting list by the defined comparison for the data type (for example, if the result of the query is simply a list of integers).
It is worth noting that the implementation of query evaluation can be simplified by decomposing the query into a set of more primitive operations. For example, the following operations are sufficient to evaluate any query of CQL:
ForEach
Times
Filter
Distinct
Sort
The following sketch details an implementation plan for any query using these primitives:
For each query source beyond the first, use a Times operation to produce a result with a tuple for each combination, named the same as the alias used to introduce the source in the query.
If the let clause is present, use a ForEach operation to introduce a tuple element for each defined expression.
For each with clause, use a Filter and express the with in terms of an Exists in the condition of the Filter.
For each without clause, use a Filter and express the without in terms of a Not Exists in the condition of the Filter.
If the return clause is specified, use a ForEach to produce the result of the return. If the return clause specifies Distinct, also attach a Distinct operation to the result.
If the sort clause is specified, use a Sort operation to produce the final sorted output.
Using this sketch, the evaluation of a query can be performed by pipelining the query into a series of more primitive operations that can be implemented more easily. This approach also lends itself to translation and/or optimization if necessary.
This section discusses the precise semantics for the representation of date and time values within CQL, as well as the calculation of date and time arithmetic. The discussion in this section assumes fully-specified date time values. The next section will discuss the implications of partially-specified date and time values.
This section provides precise definitions for the terms involved in dealing with date and time values. These definitions are based on the ISO 8601:2004 standard for the representation of date and time values.
| Term | Definition | Notes |
|---|---|---|
Date interval |
Part of the time axis bounded by two Date values. |
A Date interval comprises all Date values between the two boundary Dates and, unless otherwise stated, the boundary Date values themselves. |
DateTime interval |
Part of the time axis bounded by two DateTime values. |
A DateTime interval comprises all DateTime values between the two boundary DateTimes and, unless otherwise stated, the boundary DateTime values themselves. |
Duration |
Quantity attributed to a DateTime interval, the value of which is equal to the difference between the time points of the final instant and the initial instants of the time interval. |
In case of discontinuities in the time scale, such as a leap second or the change from winter time to summer time and back, the computation of the duration requires the subtraction or addition of the change of duration of the discontinuity. |
Nominal duration |
Duration expressed in years, months, or days. |
The duration of a calendar year, a calendar month, or a calendar day depends on its position in the calendar. Therefore, the exact duration of a nominal duration can only be evaluated if the duration of the calendar years, calendar months, or calendar days used is known. |
Second |
Base unit of measurement of time in the SI as defined by the International Committee of Weights and Measures. |
|
Millisecond |
Unit of time equal to 0.001 seconds. |
|
Minute |
Unit of time equal to 60 seconds. |
|
Hour |
Unit of time equal to 60 minutes. |
|
Day |
Unit of time equal to 24 hours. |
|
Calendar day |
Time interval starting at midnight and ending at the next midnight, the latter being also the starting instant of the next calendar day. |
A calendar day is often also referred to as a day. The duration of a calendar day is 24 hours, except if modified by: * The insertion or deletion of leap seconds, by decision of the International Earth Rotation Service (IERS), or * The insertion or deletion of other time intervals, as may be prescribed by local authorities to alter the time scale of local time. |
Day |
Duration of a calendar day. |
The term “day” applies also to the duration of any time interval which starts at a certain time of day at a certain calendar day and ends at the same time of day at the next calendar day. |
Calendar month |
Time interval resulting from the division of a calendar year into 12 time intervals, each with a specific name and containing a specific number of calendar days. |
A calendar month is often referred to as a month. |
Month |
Duration of 28, 29, 30, or 31 calendar days, depending on the start and/or the end of the corresponding time interval within the specific calendar month. |
The term “month” applies also to the duration of any time interval which starts at a certain time of day at a certain calendar day of the calendar month and ends at the same time of day at the same calendar day of the next calendar month, if it exists. In other cases, the ending calendar day has to be agreed on. |
Calendar year |
Cyclic time interval in a calendar which is required for one revolution of the Earth around the Sun and approximated to an integral number of calendar days. |
A calendar year is also referred to as a year. Unless otherwise specified, the term designates a calendar year in the Gregorian calendar. |
Year |
Duration of 365 or 366 calendar days depending on the start and/or the end of the corresponding time interval within the specific calendar year. |
The term “year” applies also to the duration of any time interval which starts at a certain time of day at a certain calendar date of the calendar year and ends at the same time of day at the same calendar date of the next calendar year, if it exists. In other cases, the ending calendar day has to be agreed on. |
Common year |
Calendar year in the Gregorian calendar that has 365 calendar days. |
|
Leap year |
Calendar year in the Gregorian calendar that has 366 calendar days. |
Table 5‑G
ISO 8601 postulates that duration can be expressed by a combination of components with accurate duration (hour, minute, and second) and components with nominal duration (year, month, week, and day). The standard allows for the omission of lower-level components for “reduced accuracy” applications. Following this guidance, CQL represents date and time values using the following components:
| Component | Type | Range | Notes |
|---|---|---|---|
Year |
Integer |
[0001, 9999] |
A CQL environment must be able to represent the minimum year of 0001, and a maximum year of 9999. Environments may represent dates in years before or after these years, the range specified here is the minimum required. |
Month |
Integer |
[1, 12] |
Months are specified by their ordinal position (i.e. January = 1, February = 2, etc.) |
Day |
Integer |
[1, 31] |
If the day specified is not present in the month (i.e. February 30th), the day value is reduced by the number of days in the given month, and the month is incremented by 1. |
Hour |
Integer |
[0, 23] |
|
Minute |
Integer |
[0, 59] |
|
Second |
Integer |
[0, 59] |
|
Millisecond |
Integer |
[0, 999] |
999 milliseconds is the maximum required precision. Note that many operations require the ability to compute the “next” or “prior” instant, and these semantics depend on the step-size of 1 millisecond, so systems that support more than millisecond precision will need to quantize to the millisecond to achieve these semantics. |
Timezone Offset |
Real |
[-12.00, 14.00] |
The timezone offset is represented as a real with two digits of precision to account for timezones with partial hour differences. Note that the timezone offset is a decimal representation of the time offset, so an offset of +2:30 would be represented as +2.50. |
Table 5‑H
CQL allows time durations, represented as Quantities, to be added to or subtracted from date or time values. The result of these operations take the calendar into account when determining the correct answer. In general, when the addition of a quantity exceeds the limit for that precision, it results in a corresponding increase to the most precise field specified. The following table describes these operations for each precision:
| Precision | Type | Range | Semantics |
|---|---|---|---|
Year |
Integer |
[0001, 9999] |
The year, positive or negative, is added to the year component of the date or time value. If the resulting year is out of range, an error is thrown. If the month and day of the date or time value is not a valid date in the resulting year, the last day of the calendar month is used. For example, DateTime(2012, 2, 29, 0, 0) + 1 year = DateTime(2013, 2, 28, 0, 0). The resulting date or time value will have the same time components. |
Month |
Integer |
[1, 12] |
The month, positive or negative is divided by 12, and the integer portion of the result is added to the year component. The remaining portion of months is added to the month component. If the resulting date is not a valid date in the resulting year, the last day of the resulting calendar month is used. The resulting date or time value will have the same time components. |
Week |
Integer |
[1, 52] |
The week, positive or negative, is multiplied by 7, and the resulting value is added to the day component, respecting calendar month and calendar year lengths. The resulting date or time value will have the same time components. |
Day |
Integer |
[1, 31] |
The days, positive or negative, are added to the day component, respecting calendar month and calendar year lengths. The resulting date or time value will have the same time components. |
Hour |
Integer |
[0, 23] |
The hours, positive or negative, are added to the hour component, with each 24 hour block counting as a calendar day, and respecting calendar month and calendar year lengths. |
Minute |
Integer |
[0, 59] |
The minutes, positive or negative, are added to the minute component, with each 60 minute block counting as an hour, and respecting calendar month and calendar year lengths. |
Second |
Integer |
[0, 59] |
The seconds, positive or negative, are added to the second component, with each 60 second block counting as a minute, and respecting calendar month and calendar year lengths. |
Millisecond |
Integer |
[0, 999] |
The milliseconds, positive or negative, are added to the millisecond component, with each 1000 millisecond block counting as a second, and respecting calendar month and calendar year lengths. |
Table 5‑I
One of the most complex aspects of quality expression logic is dealing with timing relationships in the presence of partially-specified date and time values. This section discusses the precise semantics used by CQL to help mitigate this complexity and allow measure and decision support authors to express temporal logic intuitively and accurately, even in the presence of uncertain date and time data.
The core issue being addressed is the proper handling of temporal comparisons in the presence of varying degrees of certainty about the time at which events occur. For example, a measure is looking for the occurrence of a particular procedure within two years of the measurement start date, but an EHR records that a qualifying procedure occurred in a given year, not the month or day of the occurrence. In this scenario, the EHR must be allowed to provide as much information as it accurately has, but must not be required to provide information that is not known. This requirement means that the record will contain a date and time value, but specified only to the year precision. If the semantics for timing comparison do not take this possibility into account, the resulting comparisons may yield incorrect results.
In general, the approach taken by CQL formally defines the notion of uncertainty to specify the semantics for date and time comparisons, and all the operations that rely on them. In particular, the approach described here applies to operators defined for the Date, DateTime, and Time types, the only difference between them being the precisions that must be considered. Note that the concept of uncertainty is not exposed directly in CQL or in ELM, but is defined as an implementation detail. This approach is deliberate and is taken to achieve the intuitively correct semantics without exposing the complexity involved to CQL authors and developers.
The discussion here begins by formally defining uncertainty and the semantics of operations involving uncertainty. The calculation of duration between imprecise dates is then discussed in terms of uncertainty, and then the CQL timing phrases are all defined in terms of either date and time comparison, or duration calculation. The discussion concludes with some notes on implementation of these semantics within an engine or translated environment.
Formally, an uncertainty is a closed interval over a given point type, with specific semantics defined for comparison operators. For simplicity, we use the point type Integer in the discussion that follows.
Intuitively, an uncertainty between X and Y means some value between X and Y. For example:
uncertainty[1, 10]
This uncertainty means some value between 1 and 10. Note that this representation of uncertainty assumes a continuous probability distribution along the range. In other words, the assumption is that there is no information about how likely the value is to be any particular value within the range.
Note that the special case of an uncertainty of width zero:
uncertainty[1, 1]
Must be treated as equivalent to the point value, 1 in this case.
Comparison semantics for uncertainty are defined to result in the intuitively expected behavior. For example, when comparing two uncertainties for equality:
uncertainty[1, 10] = uncertainty[1, 10]The above expression results in null, because the meaning of the statement is actually:
Is some value between 1 and 10 equal to some value between 1 and 10?
And the intuitively correct answer to that question is, I don’t know. However, for cases where there is no overlap between the uncertainties, the result is false:
uncertainty[1, 10] = uncertainty[21, 30]Again, the intended semantics of this statement are:
Is some value between 1 and 10 equal to some value between 21 and 30?
And the correct answer is, No, because there is no possible value in either uncertainty range that could evaluate to true.
In the special case of equality comparisons of two uncertainties of width zero, the result is true:
uncertainty[2, 2] = uncertainty[2, 2]This expression can be read:
Is some value between 2 and 2 equal to some value between 2 and 2?
And the correct answer is, Yes.
More precisely, given an uncertainty A with range Alow to Ahigh, and uncertainty B with range Blow to Bhigh, the comparison:
A = BIs equivalent to:
if A~low~ <= B~high~ and A~high~ >= B~low~
then if A~low~ = A~high~ and B~low~ = B~high~
then true
else null
else falseFor relative comparisons, again, the semantics are defined to give the intuitively correct answer given the intended meaning of uncertainty. For example:
uncertainty[30, 40] < uncertainty[50, 60]This expression can be read:
Is some value between 30 and 40 less than some value between 50 and 60?
And the correct answer is, Yes. If the ranges overlap:
uncertainty[30, 40] < uncertainty[35, 45]Then the result is null, with one exception having to do with boundaries. Consider the following:
uncertainty[30, 40] < uncertainty[20, 30]This expression can be read:
Is some value between 30 and 40 less than some value between 20 and 30?
And the correct answer is, No, because even though the ranges overlap (by width one at the lower boundary of the left-hand value), the result would still be false because 30 is not less than 30.
More precisely, given an uncertainty A with range Alow to Ahigh, and uncertainty B with range Blow to Bhigh, the comparison:
A < BIs equivalent to:
case
when A~high~ < B~low~ then true
when A~low~ >= B~high~ then false
else null
endAnd finally, for relative comparisons involving equality, consider the following:
uncertainty[30, 40] <= uncertainty[40, 50]This expression can be read:
Is some value between 30 and 40 less than or equal to some value between 40 and 50?
And the correct answer is, Yes, because every possible value between 30 and 40 inclusive is either less than or equal to every possible value between 40 and 50 inclusive.
More precisely, given an uncertainty A with range Alow to Ahigh, and uncertainty B with range Blow to Bhigh, the comparison:
A <= BIs equivalent to:
case
when A~high~ <= B~low~ then true
when A~low~ > B~high~ then false
else null
endNote carefully that these semantics introduce some asymmetries into the comparison operators. In particular, A = B or A < B is not equivalent to A <= B because of the uncertainty.
In addition to comparison operators, the basic arithmetic operators are defined for uncertainty, again based on the intuitively expected semantics. For example:
uncertainty[17, 44] + uncertainty[5, 10] // returns uncertainty[22, 54]The above expression can be read:
some value between 17 and 44 + some value between 5 and 10
The result of this calculation simply adds the respective boundaries to determine what the range of possible values of this calculation would be, in this case some value between 22 and 54.
Similarly for multiplication:
uncertainty[17, 44] * uncertainty[2, 4] // returns uncertainty[34, 176]The result of this calculation multiplies the boundaries of the uncertainties to determine the range of possible values for the result, in this case some value between 34 and 176.
An important step to achieving the intended semantics for precision-based timing comparisons in CQL is to allow for implicit conversion between uncertainties and point-values. This means that anywhere an uncertainty is involved in an operation with a point-value, the point-value will be implicitly converted to an uncertainty of width zero and the uncertainty semantics defined above are then used to perform the calculation. For example:
uncertainty[17, 44] > 2The point-value of 2 in this example is implicitly converted to an uncertainty of width zero:
uncertainty[17, 44] > uncertainty[2, 2]This implicit conversion means that in general, the notion of uncertainty will not be visible in the resulting syntax of CQL. For example:
days between Date(2014, 1, 15) and Date(2014, 2) > 2Even though determining the correct answer to this question involves the use of uncertainty, it is implicit in the way the operations are defined, and does not surface to the CQL authors.
To determine the duration between two date or time values, CQL supports a between operator for each date and time component. For example:
days between A and BThis expression returns the number of whole days between A and B. If A is before B, the result will be a positive integer. If A is after B, the result will be a negative integer. And if A is the same day as B, the result will be zero.
However, to support the case where one or the other comparand in the duration operation does not specify components to the level of precision being determined, the between operator does not return a strict integer, it returns an uncertainty, which is defined as a range of values, similar to an interval. For example:
days between Date(2014, 1, 15) and Date(2014, 2)The number of days between these two dates cannot be determined reliably, but a definite range of possible values can be determined. The lower bound of that range is found by determining the duration between the maximum possible value of the first comparand and the minimum possible value of the second comparand; and the upper bound is determined using the minimum possible value of the first comparand and the maximum possible value of the second:
days between Date(2014, 1, 15) and Date(2014, 2, 1) // 17 days
days between Date(2014, 1, 15) and Date(2014, 2, 28) // 44 daysIntuitively, what this means is that the number of days between January 15th, 2014 and some date in February, 2014, is no less than 17 days, but no more than 44. By incorporating this information into an uncertainty, CQL can support the intuitively expected semantics when performing timing comparisons. For example:
days between Date(2014, 1, 15) and Date(2014, 2) > 2This comparison returns true, because the lower bound of the uncertainty, 17, is greater than 2, so no matter what the actual date of the second comparand, it would always be at least 17 days. By contrast:
days between Date(2014, 1, 15) and Date(2014, 2) > 50This comparison returns false, because the upper bound of the uncertainty, 44, is less than 50, so no matter what the actual date of the second comparand, it would always be at most 44 days. And finally:
days between Date(2014, 1, 15) and Date(2014, 2) > 20This comparison returns unknown (null), because the value being compared, 20, falls within the uncertainty, so no determination can be reliably made.
As another example, consider the case when a duration is being computed between DateTime values of different precisions:
days between @2017-08-07T17:00 and @2017-08-14T // [6, 7]This duration results in an uncertainty because the starting datetime value is specified to the minute, 17:00, while the second value is only specified to the day. The resulting uncertainty interval is between 6 and 7 days, and so [6,7] is returned.
Uncertainties may also result when calculating duration for a finer precision than what is specified in the input values. For example:
days between @2012-01 and @2012-02
// Results in an uncertainty from the shortest possible duration, to the longest possible duration
// [days between @2012-01-31 and @2012-02-01, days between @2012-01-01 and @2012-02-29]Because the datetime values are both only specified to the month (from January of 2012 to February of 2012), the result is an uncertainty interval beginning with the number of days between the 31st of January, 2012 and the 1st of February, 2012 (the shortest possible duration), and ending with the number of days between the 1st of January, 2012 and the 29th of February, 2012 (the longest possible duration).
CQL also supports a difference in operator which, rather than calculating the number of calendar periods between two dates, calculates the number of boundaries crossed between the two dates. As with the duration operator, difference is defined to take imprecision in date and time values into account by returning an uncertainty.
Using the foundational elements described in the previous sections, the semantics for the various CQL timing phrases can now be described in detail. The general approach for each timing phrase is to transform it to an equivalent representation in terms of either a direct comparison, or a comparison involving a duration calculation.
The same as timing phrase is simply defined to be equivalent to a same as comparison of the date and time values involved:
A starts same day as start BThis expression is equivalent to:
start of A same day as start of BSimilarly for the or after and or before comparisons:
A starts same day or after start B
A starts same day or before start BThese expressions are equivalent to:
start of A same day or after start of B
start of A same day or before start of BThe basic before and after timing phrases are defined to be equivalent to a before or after comparison of the date and time values involved:
A starts before start B
A starts after start BThese expressions are equivalent to:
start of A before start of B
start of A after start of BIf the phrase involves a duration offset, the duration offset is applied as a date and time arithmetic calculation:
A starts 3 days before start B
A starts 3 days after start BThese expressions are equivalent to:
start of A same as start of B – 3 days
start of A same as start of B + 3 daysNote that these calculations use date/time arithmetic, applying duration, not difference semantics for the comparison.
For timing phrases involving relative comparison, the prefixes less than and more than, as well as the suffixes or more and or less can be used:
A starts 3 days or more before start B
A starts more than 3 days before start B
A starts 3 days or less after start B
A starts less than 3 days after start BThese expressions are equivalent to:
start of A same or before start of B - 3 days
start of A before start of B - 3 days
start of A in (start of B, start of B + 3 days] and B is not null
start of A in (start of B, start of B + 3 days) and B is not nullNote the addition of the null test in the case that an interval is constructed from the point B. This is necessary because if B is null and the constructed interval has inclusive boundaries, the null boundary of the resulting interval will be interpreted as continuing to the beginning or end of time (depending on whether the null appears as the starting or ending boundary of the interval).
The within timing phrase is defined in terms of an interval membership test:
A starts within 3 days of start BThis expression is equivalent to:
start of A in [start of B - 3 days, start of B + 3 days] and B is not nullNote that as with the before and after transformations, a null test is required here because if B is null, then the constructed interval would be incorrectly interpreted as continuing to the beggining or end of time (depending on whether the null appears as the starting or ending boundary of the interval).
Implementation of these semantics can be simplified by recognizing that all the date and time comparisons can be expressed in terms of a difference calculation and a comparison of the resulting (potentially uncertain) values against 0. Combined with the timing phrase translations, this means that the implementation for precision-based timing can be isolated to:
Support for run-time operations on integer-based uncertainties, including:
=, <, >, <=, >=, +, -, unary +/-, *, /
implicit conversion between integer point values and uncertainties
Precision-based duration and difference between dates and times
All the other operations and semantics can be achieved using only these primitives. For example, given A and B, both datetime values, the comparison:
A > BCan be evaluated as:
difference in milliseconds between A and B > 0Similarly:
A same day as BCan be evaluated as:
difference in days between A and B = 0Because the difference operation will return an uncertainty when imprecise date and time values are involved, the correct semantics will be applied to the comparison to the point value, 0 in this case. By structuring the evaluation engine such that all operations involving dates and times are performed in terms of these primitives, correct semantics can be achieved with a comparatively straightforward implementation.
Note also that a compile-time implicit conversion to uncertainty may also simplify the implementation, avoiding the need for integer-valued primitives to determine at run-time whether they are operating on an uncertainty.
Note that with an increased burden on implementation, uncertainty resolution could likely be more robust. For example, consider the following statement:
DateTime(2014) + 364 days
In the above example, it is almost certainly the case that the result of the addition would result in some date in DateTime(2015). However, CQL currently would return a DateTime(2014) because the addition does not result in a whole calendar period for the specified precision. An argument could be made that uncertainty resolution could be more robust as DateTime(2014) is an undefined DateTime ocurring sometime during 2014, which can be represented as the following interval:
[@2014-01-01T00:00:00.000, @2014-12-31T23:59:59.999]
Therefore, it is relevant to consider that the above addition could be added to the interval above resulting in the following:
[@2014-12-31T00:00:00.000, @2015-12-30T23:59:59.999]
However, this behavior would potentially result in a significant implementation burden and represent a significant misalignment with FHIRPath if CQL were to adopt this behavior.